 |
Chamber Model DBH-SO
Chamber to be mounted outside the level instrument process: guided wave radar (TRD) and torsion bars. Version with Slip-on Flanges (DBH-SO).
Materials: Carbon Steel, LTCS, AISI 304 / 316 and special materials like Alloy, Hastelloy etc…
Rating ranging from ANSI 150 to ANSI 2500.
|
 |
Chamber Model DBH-WN
Chamber to be mounted outside the level instrument process: guided wave radar (TRD) and torsion bars. Version with WN Butt-weld flanges (DBH-WN).
Materials: Carbon Steel, LTCS, AISI 304 / 316 and special materials like Alloy, Hastelloy etc…
Rating ranging from ANSI 150 to ANSI 2500.
|
|
DESCRIPTION
The DOMIZI Chambers allow to link different level instruments (guided wave radar, torsion bars etc..) to the process, providing various benefits to the user and resolving multiple issues.
Features and benefits of DOMIZI Chambers:
A few benefits:
– In case of fluid turbulence the chamber serves as a surge pipe.
– It allows to isolate the instrument from the tank, ensuring that the operator can work safely (high pressures/temperature and hazardous liquids)
– Maintenance operations on the instrument can be performed while the system is running.
– Chambers are designed in compliance with ASME VIII div.1 and comply with standard 97/23/CE PED.
Technical characteristics:
– Carbon Steel and Stainless Steel body (other materials available upon request)
– Process connectors: Flanged (ANSI/UNI/DIN), Threaded (NPT/GAS) or welded (SW/BW).
– Arrangement of standard process connectors: side-side, or side-bottom.
– Body rating ranging between ANSI 150 and ANSI 2500
– Available standard body diameters: 2” (DN50) ; 3” (DN80) ; 4” (DN100)
– Standard connector size: 1” (DN25) ; 1 ½” (DN40) ; 2” (DN50)
– Designed in accordance with ASME VIII div.1
– Manufactured in compliance with the PED Directive
– Designed upon specific customer request
Certifications:
– Certificate of conformity with the order
– Pressure test certificate
– Certificates of materials EN 10204 3.1 (optional)
– Declaration of conformity with PED 97/23/CE (optional)
Tests and Inspections:
– Hydrostatic pressure test
– Liquid penetrant test on welds (ASME/EN) (Optional)
– X-ray tests (ASME/EN) (on butt-welds only) (Optional)
– PMI- Positive Material Identification (Optional)
|
