|
The Pneumatic Instruments produced are listed below
:
Correct running of pneumatic
equipments in industrial processes depends, most of
cases, on steady and safe feed, i.e. feed realized
by air being continuously pressure controlled and
filtered too.
Domizi Snc included in their products range also the
Filter 970, and in order to extend application
possibilities, they produce it in two different
versions, with outer chamber in Carbon steel, and in
Stainless steel AISI 304; both versions can be fixed
on the same line of air pipe, or on a wall thanks to
L bracket, or fixed on the back of a panel.
Filter. Air is filtered by a cartridge made in
sintered stainless steel, easy to be restored and
replaced. Its chamber is provided with drain valve
to take away the oil condensate present in feeding
air.
Adjustment. The outgoing air pressure is kept steady
by a diaphragm controlled by a load spring and by a
pilot valve; the adjustment of this pressure is
realized by acting on the screw loading the spring.
The High Pressure Selector Relay Model 58S selects
the higher of two signals and releases it directly
to the next element of an instrument circuit. There
is no retransmission which means there will be no
time delay caused by this relay.
The Booster Relay Model 61F selects the lower of two
signals and releases it directly to the next element
of an instrument circuit.
The Model 61FE Booster Relay is similar to the model
61F.The main difference is that the 61FE includes a
1/8” NPT connection for those applications where a
tapped exhaust is required.
We may supply the following Spare Parts per CONEIT
SERIES 2000 Column Instruments : De
Amplifier , Regulator , Column , Sphere, ecc…. |